How to Reset a Motion Sensor Light?

plug-free-img.png

Is your motion sensor light not working? It is either stuck in the off or on position and no longer responds to your movement.

It is possible because of the light fluctuations. A minor change in the power that you might not even have detected could have created a problem with your sensor lights.

You might be thinking of replacing them altogether with the help of electricians, but there are chances that you won’t have to replace the light; resetting might work here.

So, you must know the resetting procedure to resolve this issue. If you aren’t aware, then don’t worry. We can guide you step by step and save you the money for installing the new sensor lights.

Why is the motion sensor light not working?

But before fixing it, we should troubleshoot to find the actual cause.

Problems in settings:

There can be a problem in the setting of your motion sensor light. Some manufacturers keep it in the off mode by default. In such situations, you should adjust the settings according to your requirements, and your light will work normally.

Also Read: Why are lights flickering?

Sensitivity Problems:

The other problem hindering light functioning is the sensitive issues. These lights are designed to detect even the slightest of movements, so the deposition of dust on the sensors, strong winds, and any other issue that could impact the sensitivity of the light could be the cause of the problem.

If you have checked these issues and none of them have solved your problem, then you should proceed with the steps below.

How to rest the motion sensor light?

Below is the procedure to reset the motion sensors:

Reset it through the power source method:

There must be some power source to which your lights are attached. Unplug the power source, leave it as such for 10 seconds, and re-plug it.

It resets the light, and the light must work now!

Reset it through circuit breaker:

Another method to adopt here is to reset the circuit breaker. You must move to the breaker box. Switch off the relevant circuit. Wait for at least 60 seconds before turning the breaker on.

The problem with your sensor lights must be fixed.

Also Find: Residential and Commercial Electricians in Chicago

Summing up:

The solutions mentioned above help fix the problem with the sensor light in most cases, but if it doesn’t, you’ll need help from an electrician to look at the wiring or other potential problems.

Chicago Electricians is by your side, and you can always rely on us for all your electrical problems.

773-840-0162